Ground Hog C-71-5H 2 Man Earthdrill 5.5hp Honda Engine
|
|
|
|
|
SKU:
C715H
The Ground Hog C-71-5 is two-man earth drill designed to deliver years of reliable service with superior performance. It has been a proven performer for over 40 years. Its rugged design promotes durability and requires very little maintenance. The heart of this unit is our time-tested transmission. The transmission is an efficient worm drive design utilizing alloy steel shafts, large tapered roller bearings and our standard 7/8 square auger drive. Aluminum castings are used throughout the C-71-5's construction to produce a unit that is both strong and lightweight. The C-71-5 uses an air cooled centrifugal clutch and a trigger-type, return-style throttle. Both operator positions are equipped with individual stop switches and tubular steel handlebars. The C-71-5 is available with 3 engine options; Honda, Briggs & Stratton Intek and Subaru.
|
|
|
|
Ground Hog C-71-5H 2 Man Earthdrill 5.5hp Honda Engine
|
Ground Hog C-71-5H 2 Man Earthdrill 5.5hp Honda Engine
|
Ground Hog C-71-5H 2 Man Earthdrill 5.5hp Honda Engine
|
Ground Hog C-71-5H 2 Man Earthdrill 5.5hp Honda Engine
|
Ground Hog C-71-5H 2 Man Earthdrill 5.5hp Honda Engine
|
| (Click to see larger image and other views) |
|
|
|
|
Customers that have purchased this product have also bought:
|
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. ( ) indicates a required accessory.
|
|
|
|
|
-
Ground Hogs time tested transmission -
Low maintenance -
Easily transported -
Rapid Return ON Investment -
7/8 square auger drive (No shear pins needed) -
Heavy wall steel handlebars -
Aluminum Castings for strength and light weight -
Centrifugal clutch with needle bearings and all metal shoes and drum -
Trigger-type return-style throttle -
Heavy Duty cog-type drive belt -
Will handle the hardest soils -
Handles up to a 12 auger
Two engine options:
Honda, and Briggs & Stratton Intek
| Maximum Auger Speed | 160 rpm @ 3600 engine rpm (no load) | | Maximum Torque | 192 ft. lbs. torque (approximate) | | Max. Auger Diameter | 12 inches (31 cm) | | | | | Weight | 72 lbs. (33 kg) | | Length | 40.5 inches (103 cm) | | Width | 30 inches (76 cm) | | Height (Honda) | 20.5 inches (52 cm) |
|
|
Customers that have purchased this product have also bought:
|
|
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.
|
|
|
|
|
Average Ratings: No rating
|
|
Quality:
|
No rating
|
|
Performance:
|
No rating
|
|
Value:
|
No rating
|
|
|
|
|
|
