This CC (constant current), CV (constant voltage) welder delivers up to 500 amps of DC welding output. As a generator it provides up to 3kW of 120/240 volt AC power. This unit can also be simultaneously used as a welder and generator.
- Standard lifting bale, external oil and fuel drains
- Showcases a clean burning Tier II EPA-approved Kubota diesel engine
- CC and CV welding capability
- Electric-start, gasoline-powered
- Excels in SMAW, FCAW, GMAW, GTAW and ACAC welding processes
| UNIT SPECIFICATIONS | | DC Voltage | CC: 38 V | CV: 16-40 V | | DC Current | CC: 500 A | CV: 500 A | | Current Range | 40-500 A | Max Duty Cycle
w/ Full Amps Availible | 100% @350 A | | Welding Processes | SMAW
FCAW
GMAW
GTAW
ACAC | | Fuel Tank Capacity | 12 gal | L | Fuel Consumption
at Rated Load | 1.3 gph |
| | DIMENSIONS & WEIGHTS | | Overall Length | 53 in | 134.62 cm | | Overall Width | 33 in | 83.82 cm | | Overall Height | 34 in | 86.36 cm | | Operating Weight | 1025 lb | kg |
|
| GENERATOR FEATURES | AC Power Output
(Single Phase) | 3 kW | | Cycle | 50/60 Hz | | Voltage | 120 V | | Amperage | 25 A | | Voltage Regulation | 7 % | | Receptacles | NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A |
| | GENERAL FEATUERS & OPTIONS | | AC/DC Simultaneous Use | Standard | | Lifting Bale | Standard | | External Drains | Standard | | Automatic Safety Shutdown | Oil Switch
Water Temperature
Thermal Switch DC
Low Battery Charge | | Idle Switch | Standard | | Optional Trailer | TRLR-MP, TRLR-MPXF** | **TRLR-MPXF has a built in 28 gal. fuel cell |
