Multiquip's welder/generators are engineered with a new permanent magnet alternator plus features typically found only on much larger welders.
- Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding.
- Ideal for job site and remote-area service applications
- Produces 50-180 amps for DC welding, 3kW output to power AC tools.
- Operator can draw AC power and weld simultaneously
- 11-hp Honda GX340 gasoline engine
- Permanent magnet alternator-significantly reduces overall weight compared to other welders in its class
| UNIT SPECIFICATIONS | | DC Voltage | CC: 26.8 V | | DC Current | CC: 180A | | Current Range | 50-180 A | Max Duty Cycle
w/ Full Amps Availible | 50% @180 A | | Welding Processes | SMAW
FCAW
GTAW
ACAC | | Fuel Tank Capacity | 3.7 gal | 16.8 L | Fuel Consumption
at Rated Load | 0.93 gph |
| | DIMENSIONS & WEIGHTS | | Overall Length | 27.5 in | 69.85 cm | | Overall Width | 22 in | 55.88 cm | | Overall Height | 23.75 in | 60.3 cm | Shipping Dimensions
| 28.5 x 23 x 28 in
72.4 x 58.4 x 71.1 cm | | Operating Weight | 225 lb | 102.3 kg | | Shipping Weight | 239 lb | 108.6 kg |
|
| GENERATOR FEATURES | AC Power Output
(Single Phase) | 3 kW | | Cycle | 60 Hz | | Voltage | 120 V | | Amperage | 25 A | | Voltage Regulation | 3 % | | Receptacles | NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A |
| | GENERAL FEATUERS & OPTIONS | | AC/DC Simultaneous Use | Standard | | Lifting Bale | Standard | | Automatic Safety Shutdown | Oil Level | | Idle Switch | Standard | | Optional Wheel Kit | UWK |
|
| ENGINE SPECIFICATIONS | | Engine Make/Model | Honda GX-340 | | Start Method | Electric/Recoil | | Engine Power | 11 HP | 8.2 kW | | Engine RPM | 3600 | | Fuel Type | Gasoline | |
